반응형
Global Parameters 설정 절차
1. 초기에 boot parameter를 설정하지 않으면 rommon> boot 명령어를 사용한다.
rommon 1 > boot disk0:cat4500es8-universalk9.SPA.03.03.02.XO.151-1.XO2.bin
Self decompressing the image : #################################################
################################################################################
################################################################################
################################################################################
################################################################################
[OK]
Restricted Rights Legend
Use, duplication, or disclosure by the Government is
subject to restrictions as set forth in subparagraph
(c) of the Commercial Computer Software - Restricted
2. 어떠한 설정도 되어 있지 않으므로 다이얼로그 모드가 나타난다. 'Yes'를 선택하면 아래와 같이 나타나다.
--- System Configuration Dialog ---
Continue with configuration dialog? [yes/no]: y
At any point you may enter a question mark '?' for help.
Use ctrl-c to abort configuration dialog at any prompt.
Default settings are in square brackets '[]'.
Basic management setup configures only enough connectivity
for management of the system, extended setup will ask you
to configure each interface on the systemWould you like to enter the initial configuration dialog? [yes]: no 여기서는 No를 선택하여 직접 환경설정을 하는 것으로 한다.
3. Privileged EXEC 모드로 진입하여 환경설정을 한다. 설정의 변경은 Privileged 모드에서만 가능하다.
Router> enable
Router#반응형